Light Duty Wire Mesh Weaving Loom 1300mm Quick Changeover Reliable Drive
1.Light Duty Wire Mesh Weaving Loom Introduction
Designed for fine wires and higher mesh counts, this 1300 mm light-duty wire mesh loom delivers stable, repeatable quality with fast recipe-based changeovers. An industrial PLC + HMI coordinates servo-driven warp let-off, beat-up, and take-up, while closed-loop tension maintains target density across the full cloth width. Operators call up saved recipes (mesh count, tension, speed, weave pattern) to switch specifications in minutes and reproduce best-known settings shift after shift.
The loom’s low-vibration drivetrain and reinforced frame improve surface flatness and clean selvedges, especially on fine wire. Take-up options include straight-roll for discrete batches and endless take-up for long production runs. Safety interlocks, monitored E-stops, and clear alarm logs support safe day-to-day operation and quicker troubleshooting.
2. .Light Duty Wire Mesh Weaving Loom Typical capability (project-dependent):
• Working width: 1300 mm (customizable)
• Weaves: Plain / Twill / Dutch
• Fine wire: down to ≈ 0.01–0.20 mm (material-dependent)
• Mesh range: ~30–500 mesh/inch (plain; others per spec)
• Speed: up to 120 rpm (wire/mesh dependent)
3.Products Parameter:
| Feature Category | Light-duty Loom (Model B) | Heavy-duty Loom (Model D) |
| Mesh Width | 1300mm 1600mm | 1300mm 1600mm |
| Harness System | Positive (Overhead) | Negative (Bottom Cam) |
| Web Removal Method / Doffing Method | Continuous Web Removal or Direct Winding | Continuous Web Removal or Direct Winding |
| Wire Diameter Range | Continuous Web Removal | 0.01 - 0.2 mm | 0.1 - 0.6 mm |
| Direct Winding | 0.03 - 0.2 mm | 0.1 - 0.3 mm |
| Mesh Count Range | Plain Weave | 30 - 500 mesh/inch | 10 - 100 mesh/inch |
| Twill Weave | 30 - 635 mesh/inch | 20 - 100 mesh/inch |
| Dutch Weave | 100 - 2300 mesh/inch | 30 - 500 mesh/inch |
| Beating-Up Frequency | Max. 120 r/h | Max. 100 r/h |
| Motor Power | 2.2kw | 2.2kw |
| Standard Configuration | Crankshaft Type | Bushing Type |
| Side Frames | Casting Wall Plates |
| Tension System | Tension Sensor |
| Rapier Head Type | Carbon Fiber |
| Drive Type | Fully Digital Control (CNC) |
4. Quick FAQ
Q1. What wire materials can your weaving machines handle?
Stainless steel (e.g., SS304/316), low-carbon and galvanized steel, aluminum, brass, copper, and some nickel-based alloys (process-dependent). Actual feasibility depends on wire diameter, tensile strength, surface finish, and spool quality. We validate specs via sample or trial run.
Q2. I’m new to wire mesh—how do I choose the right machine?
Start from your application and spec:
- Mesh count & weave (Plain / Twill / Dutch)
- Wire diameter range & material
- Working width (customizable; typical 1.3–1.6 m)
Throughput target & roll/take-up preference (straight-roll / endless)
As a rule of thumb: B-Type (Light-Duty) for fine wires & higher counts; D-Type (Heavy-Duty) for thicker wires & longer continuous runs. Share your target mesh and wire—our team will map to a base model + options.
Q3. Do you provide installation, training, and commissioning?
Yes. We offer on-site or remote commissioning, operator training, and process onboarding. A pre-shipment FAT is available; SAT can be arranged at your plant.
5. Detailed Images:
Product Tags:
|
|
Light Duty Automatic Wire Mesh Machine 1300mm Quick Changeover Reliable Drive Images
|
